Land rover defender 110 300tdi camper project

Sellers Comments -here I have for sale my land rover demountable camper project a long term life changing illness means I cant finish it. The land rover is fully restored ground up and is registered as a rebuild on the v5. New galvanised chassis, all new seals and bearings on axels, all the suspension bushes replaced with uprated Polly bushes, new springs and shocks, new front and rear antiroll bars, new front and rear prop shafts and rear air lift fitted. The brakes all replaced with new master cylinder, vacuum pump, pipes, hoses, callipers, discs and pads. The engine is a fully rebuilt reconditioned 300tdi with new turbo, uprated inter cooler, all new water/air hoses, alternator etc. there also an aux water heater fitted so the cab heats up faster. there's a slight clunk coming from the front of the transfer box if you pull away to fast but I do have a high ratio box I intended to fit and it will go with the sale. Inside the cab is fully insulated and carpeted (needs a better head liner). heated seats, JVC sound system, plenty of gauges for oil, air, water, temp, fuel, voltage etc. there's a 12v air compressor under the drivers seat to supply the rear air lift and a PCL outlet for tyre inflation or running small air tools etc. The two door mirrors drop down 90' to give a wider rear view. 12v super winch on the front with wireless remotes or plug in controller, heavy front sump guard, large LED light bar on roof (for off road use only ;-) two rear work lights, adjustable tow bar. the rear frame for mounting the flat bed/camper is bolted the the chassis and is designed for multi use such as fitting a 5th wheel mount or rear recovery Crane. The flat bed is unfinished and is 6' wide by 7' long I have all new hinges etc to make up the drop sides and are included in the sale as well as all the stands and jacks for mounting/unmounting the bed. The camper back is an unfinished empty shell the only part that's finished is the over cab canopy I have a new light Wight steel double bed frame that with slight alteration will fit this space. All the windows are new with fly screens and blinds apart for the rear frosted bath room window (2nd hand). There's a gas locker, battery box, door for cassette toilet and vents for a fridge fitted as well as places for water power inlets. Mounting/unmounting is made easy with 4 x 12v jacks all controlled by a remote hand held unit (might not be the best system but it works). In all I have put over 2 years and a lot of money into the project and hope someone can take on the challenge of finishing it, happy bidding...