Landrover V8 Highbrid Range Rover Based with 3.5 V8 engine on carbs Taxed Exempted, MOT May 2014 Shortened Range Rover Chassis with coil springs and discs all round, power steering, 3.5 v8 engine.
Landrover 90/defender bulkhead and doors,series tub,rear door, roof and windscreen. Landrover 90/defender dash and instruments, button start. Landrover Cobra bucket sear, 90/defender middle,passenger seat(torn on back ,i have replaced the base cover) Mountey steering wheel, 4 speed box, Rear tub/door checker platered,rear bench seat.
previous owner had it for over 8 years and had used it for towing his speed boat to the lake district so hasnt been used for offroading over this time, i have been using this for my daily driver and has proven to be realiable although a little thirsty!! it also comes with a spare set of conway MT track half worn set of 5 ,Please bear in ,mind this is not a new truck and is forty years old!,does drop an odd spot of oil here and there (as all Landrovers of this age)but have new gaskets/seals to fix that will come with it, just had new handbrake shoes ,its great to drive and gets comments/looks wear ever it goes! Im not an expert on landys but please email any questions you have and feel free to come and have a look so you know what your bidding on.
i have just fitted a list off things in the last two months as i have bought it from a local seller, due to not having any more time to finish i have bitten off more than i can chew as i have my scooby as an ongoing project,
things i have replaced , reconed steering box as this packed up the week i got it, i rebuilt the drag link at the same time.
the distributor packed up as well so i have put a new dizzy , coil, and amplifier on ,
i replaced the front and rear suspension with the gaz 2 inch lift kit wit new poly bushes , new camber arms, new front galvanised strut turrets, also replaced the rear axle input seal as it was leaking badly,
it does want work for its next mot , you would be better coming to mull it over but it runs and drives so you can use it while repairing, wants a little bit off welding here and there not much, the wiring is functional but needs tidying , the chassis needs painting i have done it in places but its a timely job lol,
the only other negative is the front swivel joints need doing they are pitted and leaking , this was my next job its around £140 for the parts and the rest is your labour i have a manual and they arnt bad too replace.
please no messers if you want a project thats in progress and you can drive then this is for you but believe me its not a rolls royce its 40 years old and wants much love
Landrover 90/defender bulkhead and doors,series tub,rear door, roof and windscreen. Landrover 90/defender dash and instruments, button start. Landrover Cobra bucket sear, 90/defender middle,passenger seat(torn on back ,i have replaced the base cover) Mountey steering wheel, 4 speed box, Rear tub/door checker platered,rear bench seat.
previous owner had it for over 8 years and had used it for towing his speed boat to the lake district so hasnt been used for offroading over this time, i have been using this for my daily driver and has proven to be realiable although a little thirsty!! it also comes with a spare set of conway MT track half worn set of 5 ,Please bear in ,mind this is not a new truck and is forty years old!,does drop an odd spot of oil here and there (as all Landrovers of this age)but have new gaskets/seals to fix that will come with it, just had new handbrake shoes ,its great to drive and gets comments/looks wear ever it goes! Im not an expert on landys but please email any questions you have and feel free to come and have a look so you know what your bidding on.
i have just fitted a list off things in the last two months as i have bought it from a local seller, due to not having any more time to finish i have bitten off more than i can chew as i have my scooby as an ongoing project,
things i have replaced , reconed steering box as this packed up the week i got it, i rebuilt the drag link at the same time.
the distributor packed up as well so i have put a new dizzy , coil, and amplifier on ,
i replaced the front and rear suspension with the gaz 2 inch lift kit wit new poly bushes , new camber arms, new front galvanised strut turrets, also replaced the rear axle input seal as it was leaking badly,
it does want work for its next mot , you would be better coming to mull it over but it runs and drives so you can use it while repairing, wants a little bit off welding here and there not much, the wiring is functional but needs tidying , the chassis needs painting i have done it in places but its a timely job lol,
the only other negative is the front swivel joints need doing they are pitted and leaking , this was my next job its around £140 for the parts and the rest is your labour i have a manual and they arnt bad too replace.
please no messers if you want a project thats in progress and you can drive then this is for you but believe me its not a rolls royce its 40 years old and wants much love
